Process urban sludge with organic fertilizer pellet making machine

1. How to make organic fertilizer from urban sludge?

At present, with the development of organic fertilizers made by organic fertilizer pellet making machine encouraged and rewarded by many countries, urban sludge has also become a treasure.

(1) After fermenting biogas from sewage treatment plants or manures such as cow dung, the biogas residue and sludge are subjected to pressure filtration and then enter the batching part of the complete set of sludge composting equipment of the organic fertilizer pellet making machine factory into the silo;

(2) The raw material ingredients of sludge include crushed straw and sawdust powder, and the deodorizing powder is added to the batching part of the complete set of sludge composting equipment of the organic fertilizer pellet making machine factory according to different proportions into the silo;

(3) The prepared material enters the main belt and enters the double-shaft forced mixer for continuous stirring, and the mixing is uniform;

(4) The prepared materials are transported to the drum fermentation machine through the belt conveyor for pre-fermentation;

(5) The fermented materials are transported to the dump truck through the belt conveyor and transported to the fermentation tank for secondary fermentation.

(6) The secondary fermentation adopts the sludge fermentation turning and throwing machine. This organic fertilizer equipment factory turning and throwing machine solves the situation that the aeration holes are basically blocked by the aerobic fermentation and aeration method of the sludge, and the sludge fermentation is turned over. The throwing machine can supply oxygen to the sludge at the same time during the turning and throwing process.

The sludge organic fertilizer pellet making machine and organic fertilizer production line refers to a complete set of equipment that uses chicken manure as the main raw material to produce organic fertilizers. Some customers with less investment choose fermentation equipment, crushing equipment, screening equipment and packaging equipment to form a organic fertilizer pellet making machine production line of powdered organic fertilizer.

After several years of research and the introduction of foreign microbial fermentation technology, Richi Machinery has successfully completed the process and complete sets of organic fertilizer pellet making machine for the production of sludge treatment organic fertilizers in combination with soil, crops, climate and other conditions.

After the sludge treated by our company’s technology is made into compound organic fertilizer, the fertilizer particles are neat, the nutrients required by plants in organic and inorganic are sufficient, and various plants are easy to absorb, which can increase crop yield by more than 10%, and can play a role in Loosening the soil and improving the soil quality will play a major role in the fertilizer industry.

organic fertilizer pellet making machine

2. Working principle of organic fertilizer pellet making machine

Using the mechanical stirring force of high-speed rotation and the resulting aerodynamic force, the fine powder material can be continuously mixed, granulated, spheroidized and densified in the organic fertilizer pellet making machine, so as to achieve the purpose of granulation.

 The particle shape is spherical, the sphericity is greater than or equal to 0.7, the particle size is generally between 0.3-3 mm, and the granulation rate is greater than or equal to 90%. The size of the particle diameter can be properly adjusted by the material mixing amount and the spindle speed.

Generally, the lower the mixing amount, the higher the speed. The higher, the smaller the particles, and vice versa. Scope of application: This organic fertilizer pellet making machine is especially suitable for the granulation of light and fine powder materials.

  • The finer the basic particles of the fine powder material, the higher the sphericity of the particles and the better the quality of the ball. Typical application materials: chicken manure, pig manure, cow manure, charcoal, clay, kaolin, etc.
  • The organic fertilizer pellet making machine is specially used for granulating organic fermented fertilizers with organic fertilizer raw materials such as livestock and poultry manure, composting fertilizers, green manures, sea fertilizers, cake fertilizers, peat, soil and miscellaneous fertilizers, three wastes, microorganisms, etc. , the particles are spherulites.
  •  The qualified granulation rate of this organic fertilizer pellet mill machine is as high as 80-90%, and it is suitable for a variety of different formulas. The compressive strength of organic fertilizer is higher than that of discs and drums, the rate of large balls is lower than 15%, and the uniformity of particle size can be passed according to user requirements.
  • The organic fertilizer making machine has stepless speed regulation function adjustment.
  • This organic fertilizer pellet machine is most suitable for direct granulation of organic fertilizer after fermentation, which saves the drying process and greatly reduces the manufacturing cost. Complete sets of new organic fertilizer equipment.

The products produced by the bio-organic fertilizer pellet making machine are made of fresh chicken and pig manure, without any chemical ingredients. However, chickens and pigs have poor digestion ability and can only consume 25% of the nutrients, while the other 75% of the nutrients in the feed are excrement discharge extrusion organic fertilizer pellet making machine, double roll granulator, trommel screen, high moisture material dryer, BB fertilizer blender, double roll fertilizer pelletizer, fermentation turner, , drum fertilizer pelletizer, multifunctional organic fertilizer (biological) spherical organic fertilizer pellet making machine.

I hope the above related content about organic fertilizer pellet making machine is helpful to you. For more information about organic fertilizer pellet mill, you are welcome to consult the staff of Richi Machinery, we will serve you wholeheartedly!

Process flow of floating fish feed making machine plant

Due to the small stomach and stomach of aquatic animals such as fish and shrimp, and poor digestion and absorption capacity, the floating fish feed making machine technology of aquatic feed is far more demanding than that of livestock and poultry feed. Therefore, it is particularly important to choose the production equipment of aquatic feed.

The complete set of floating fish feed making machine automatically heats up through the friction of the machine itself during production and processing, so that the material is gelatinized, matured, granulated, and cooled at one time, and the packaging surface is smooth and clean, with moderate hardness, which is convenient for sealed storage.

According to the needs of floating fish feed mills, it can be adjusted within 1.8mm-6mm, and it is suitable for processing pellet feeds such as pigs, cattle, sheep, rabbits, chickens, ducks, and fish. There is no need to add water or drying during the granulation process of the floating fish feed making machine.

When the natural temperature rises to about 70 degrees, the starch can be gelatinized, the inside of the pellets is deepened, the surface is smooth, the hardness is high, and it can be stored for a long time.

1. Process flow of floating fish feed making machine plant

Raw material preparation → mixing → conveying → extrusion → conveying → drying → screening → oil injection → seasoning → (packaging)

(1) Configuration: Mixer → Feeder → fish feed pellet extruder → Air Conveyor / Elevator → Multilayer Oven → Vibrating Screen → Elevator → Fuel Injector → Roller → (Packing Machine)

(2) Due to the need for pulverization in the production of some feeds, it can be used: powder mixer → feeder → floating fish feed extruder machine → pulverizer → (packing machine)

2. Process composition of floating fish feed production line

  • Mixing machine: According to the output of the floating fish feed production line, choose different types of mixing machine, there are two main models for you to choose.
  • Feeder: The motor is used for power screw conveying to ensure convenient and fast feeding.
  • Floating feed extruder machine: According to the output of the production line, different types of DSE type floating fish feed making machine are selected. The output can range from 120kg/h to 1000kg/h.

Corn meal, bone meal, meat meal, etc. can be used as raw materials. The specific product shape can be replaced by molds.

  • Elevator: The feed is transported to the oven, the height of the elevator is determined according to the oven, and an air conveyor can also be used.
  • Multi-layer oven: Most of the ovens are electric ovens. The temperature is adjusted between 0-200 degrees through the control cabinet. The parts in contact with the material are stainless steel double-layer mesh bags. The baking time can be adjusted according to the speed. Can;
  • Vibrating screen: Sieve out excess debris.
  • Seasoning line: There are octagonal, cylinder, single-roller, and double-roller seasoning lines, which are configured according to output and product properties.

3. Floating fish feed making machine advantages

  • Simple operation, two people can operate completely (including packaging);
  • Easy to clean, the screw has self-cleaning function;
  • Mainframe frequency conversion control, energy saving and high efficiency;
  • Reasonable design, durable, no need to replace the screw within 2 years, low wear.
floating fish feed making machine plant

4. Floating fish feed making machine features:

  • The full-price pellets produced by this floating fish feed making machine can meet the needs of animals for protein, energy, calcium, phosphorus, trace elements, vitamins and other nutrients in different periods.
  •  The available protein content is high, the amino acid matching is reasonable, the animal grows fast, the fur is large, the fluff is fine and thick, the needle hair is dense and straight, and the coat is bright.
  • The floating fish feed making machine is added with drugs, digestive enzymes, probiotics and anti-stress factors, which can effectively prevent various diseases such as animals, red claws, self-biting, etc.
  •  It can improve the reproductive ability of breeding animals, with early estrus, obvious signs of estrus, and concentrated estrus time, the female animal has a high conception rate and a large number of litter.
  • The floating fish feed making machine can effectively prevent the anorexia of gestational female animals, the calf animals are born large and neat, the healthy calf rate is high, and the weaning survival rate is significantly improved.

5. Advantages of puffed granules:

The extruded pellet compound feed made by floating fish feed making machine can be fed directly. Its advantages are:

  • Increase the secretion of saliva, prolong the digestion time of the feed in the digestive tract, make up for the shortcomings of the short digestive tract of the leather animal and the low digestion and absorption rate of nutrients in the feed, thereby improving the feed quality, digestion utilization, reduce indigestion.
  • The cubs can be fed freely, avoiding the uneven eating and unbalanced growth and development caused by the competition for food, and improving the uniformity and weaning weight of the cubs.
  • The growing beasts eat freely, which solves the problem of low feed intake and slow growth rate of the growing beasts in the summer high temperature season.
  • When feeding thin material or porridge material, the leftover material is easy to deteriorate, and the high fat in the powder material is also easy to be oxidized and deteriorated in high temperature season. occurrence of animal diseases.
  • The use of pellet products made by floating fish feed making machine has strong controllability of feeding operations, low human operation risk, low labor intensity, short labor time, less equipment investment, saving water, electricity and fuel, which is conducive to large-scale breeding and large-scale operation.
biofuel pellet machine

When buying biofuel pellet machine?

Four major problems should be paid attention to when buying biofuel pellet machine.

Biofuel pellet machines are pellets that make wood chips into biomass fuels. There are many biomass pellet mill machine manufacturers on the market that produce this kind of biofuel pellet machine, and many users do not know how to choose when purchasing such biomass machines. The following are 4 major issues that should be paid attention to when buying a biomass pellet machine.

1. How to choose biofuel pellet machine?

(1)Choose a powerful brand company

Although there are many companies on the market that are capable of producing such biofuel pellet machine, the quality of the products produced varies widely. Especially in terms of equipment function and service life, the quality of products produced by strong brand enterprises is better.

(2)Select the machine model that matches the raw materials

Because the granular materials used in different regions are different, some regions have more wood scraps, and some regions have more straw scraps. When purchasing a machine, you should consider the production raw materials, and then choose the biofuel pellet machine specifications and models that match the raw materials.

(3)Consider the spare parts configuration and after-sales service of the machine

Some parts of the sawdust shredder are wearing parts and need to be replaced from time to time. If the purchase of such spare parts is relatively troublesome, it will affect the production. Ask the biofuel pellet machine manufacturer whether they provide door-to-door maintenance services, or what maintenance outlets are there. It can be said that the after-sales service of the manufacturers producing this type of machinery is very important.

(4)Production efficiency

 Before purchasing a biomass pellet machine, the production efficiency of the users who have already purchased should be investigated first.

Before buying a machine, first inspect the biofuel pellet machine production line that others are already running, and then determine whether it is suitable for your own investment in production.

Because some areas are not rich in raw materials for production, raw materials need to be purchased from other places, which will increase transportation costs and lead to unsatisfactory returns. Therefore, to investigate first, you can avoid the risks brought by blind investment.

After the above introduction, it can be seen that the precautions for purchasing a biomass pellet making machine include: choosing a powerful brand enterprise, choosing a biofuel pellet machine model that matches the production raw materials, considering the spare parts configuration and after-sales service of the machine, and checking the existing The user’s production benefit of purchasing the machine, etc.

2. What’s biomass energy?

biofuel pellet machine

The concept of biomass energy can be interpreted in a broad, narrow and legal sense.

In a broad sense, it can be understood as the energy form of solar energy stored in biomass in the form of chemical energy, and the energy with biomass as the carrier can be directly or indirectly derived from the photosynthesis of green plants, and can be converted into conventional solid and liquid , gaseous fuel, is a renewable and the only renewable carbon source.

From a narrow and legal perspective, biomass energy refers to the energy converted from natural plants, manure, and urban and rural organic waste. According to its source, it can be divided into forestry residues, agricultural residues, domestic sewage, industrial organic waste There are six categories of waste residue and waste liquid, urban and rural solid waste and livestock and poultry manure.

Biomass energy is chemical energy and the only renewable fuel that can be stored and transported. Facing diversified and multi-period heating needs, biomass fuel can be flexibly satisfied, and biomass resources are abundant, widely distributed and economical.

Taking the EU region, which is the first in the world committed to low-carbon development, as an example, Denmark, Sweden, Finland and other countries have built a very competitive biomass energy industry chain based on a wide range of agricultural and forestry wastes, and have become the first in the energy market.

The largest coal-fired power plant in the UK is converted to burning biomass, achieving zero carbon emissions, obtaining huge carbon emission reduction benefits, and realizing the compatibility of biomass energy with existing fossil energy infrastructure.

In addition, biomass energy is also the only renewable energy variety that can completely replace fossil energy. In addition to meeting the needs of the three major energy terminals, power, electricity and heat, bio-based materials can also be produced to replace petroleum-based materials, which is also impossible for other renewable energy sources. Biorefinery based on biomass resources is now also emerging as a new industry to replace petroleum refining in the EU.

Biofuel pellet machine is a biomass energy pretreatment equipment. It mainly uses biomass such as wood chips, straws, rice husks, and bark from agricultural and forestry processing wastes as raw materials, which are solidified and formed into high-density pellet fuels through pretreatment and processing.

The advantage of biomass pellet fuel is to make full use of biomass energy to replace coal, reduce CO2 and SO2 emissions, help environmental protection and control greenhouse gas emissions, slow down climate deterioration, and reduce the occurrence of natural disasters.

3. Biofuel pellet machine turns straw and dead wood into fuel treasure

Let me give you an example of a customer in Gansu Province, “turns waste into treasure” from combustible materials such as straw and dead wood, and uses a biofuel pellet machine to generate biomass pellet fuel for heating in winter, which not only protects the environment, but also brings benefits to the masses.

We saw in a customer site boiler room that biomass pellet fuel is being used for heating in the boiler. The staff of Dianzi Township told us that compared with traditional coal, biomass fuel is very environmentally friendly and convenient.

Biomass pellet fuel is a project attracting investment by Dianzi Township. The pellets are mainly made of dead branches, straws and other agricultural and forestry wastes as raw materials. After being processed by pulverizers, biofuel pellet machines and other equipment, they are made into various shaped renewable material fuel machines or directly burned in various biomass boilers.

New clean and green environmental protection Compared with traditional fuels, fuel has the advantages of easy transportation, high combustion efficiency, low residual carbon content, low composition of harmful gases emitted during combustion, and ash can be directly used as fertilizer.

The use of biofuel pellet machine not only solves the problem of nowhere to stack agricultural and forestry wastes of surrounding farmers, but also increases farmers’ income. Villager Dong Zhifa burned all the branches he pruned in previous years, but this year he took it to the biomass pellet factory and sold it for more than 200USD.

Biomass pellet fuel has many advantages, but as a new type of fuel, the public’s awareness is not very high. Now, various methods are adopted to strive to make this energy-saving and environmentally friendly heating method accessible to thousands of households.

Richi Machinery is an equipment manufacturer specializing in the biomass pellet mills for sale, and focuses on technical innovation and sustainable development all the time. It ranks as one of domestic leading manufacturers in research & development capability, manufacturing capability and product quality.

If you want to know more about biomass pellet mill for sale Brazil, biomass pellet mill for sale Romania, biomass pellet mill for sale South Korea, please contact Richi Machinery for details.

How to choose home wood pellet mill model?

Now all over the world, many regions have begun to vigorously promote biomass energy granules. In this environment, home wood pellet mill has its glowing and warm soil. Let’s take a look at how buyers can choose their own wood pellet mill model.

At present, there are many models of home wood pellet mills on the market, and each model has its own strengths and weaknesses. People who are new to the industry are often confused and do not know how to choose. The editor reminds buyers that when choosing a home wood pellet mill, you must choose the model that suits you. (Related post: fuel pellet plant)

1. How to choose the model of wood pellet mills for home use

At present, the mainstream models of sawdust home wood pellet mill on the market mainly include the following: flat die home wood pellet mill, horizontal ring die wood granulator, screw extrusion wood pellet mill, stamping pellet granulator, roller extrusion wood pellet mill, vertical type granulator.

First of all, let’s exclude several types of home wood pellet mills, which are extremely unreasonable for the production of biomass materials such as shavings.

The flat die wood pellet mills for home use is mostly used for small concentrate feed processing. Due to the flat die, the pressing wheel is pressed downwards, and it is easy to deform or crack after the flat die size is large. Therefore, the model is not too large and belongs to Small equipment; at the same time, due to the rotating structure of the mold, the pressing wheel is still in the granulation chamber as a whole, and the phenomenon of material blocking is easy to occur.

Ring die home wood pellet mill, this type of model is the most suitable model for pressing biomass materials in the current market. Its appearance can realize vertical feeding and the rotating structure of the pressing wheel will not cause fluffy and lighter biomass materials. phenomenon; the ring die can be enlarged in structure and is not limited by the process, so the large-scale equipment can be formed on the ground; the reducer adopts a special model, which can provide stronger extrusion force, and has strong resistance performance and is not easy to be damaged.

Therefore, the ring die pellet machine is the mainstream biomass pellet processing equipment on the market. (Related post: wood pellet mill for sale)

2. Application of home wood pellet mill

home wood pellet mill

Every autumn and winter, the problem of straw burning in rural areas is repeated. In order to save resources and protect the environment at the same time, it is imminent to turn waste into treasure. Scientists have successively invented a variety of machines to solve this problem. The biomass pellet function can realize the resource conversion of planting energy. The advent of this home wood pellet mill can effectively solve the problem of straw burning.

The following is a good introduction to the biomass home wood pellet mill:

Biomass pellets are actually the second generation technology of biomass energy, an upgraded version of ethanol gasoline. In Europe and the United States, the development of this technology is booming. The second-generation technology uses a wider range of raw materials, including straw, cotton stalks, fallen leaves, etc., which can play the role of “turning waste into treasure”.

The benefits of biomass pellets are many: cleaning, turning waste into treasure, increasing farmers’ income, ensuring national energy security, etc. (Related post: pellet production line in Thailand)

Biomass energy can not only generate electricity, but also control oil and gas, and can also meet the needs of aircraft, automobiles, ships, etc. using liquid and gas fuels. Compared with other new energy sources such as wind energy, hydro energy, solar energy, and nuclear energy, biomass energy is the only product that can fully replace traditional fossil energy.

Many countries have abundant biological natural resources, but most of them have not been used, but caused air and water pollution. The emergence of home wood pellet mills has turned this matter around.

However, as experts have said, when these new energy products were just beginning to develop, the cost was far greater than the prices of existing products on the market due to too little output. In this case, the government should have corresponding fiscal and tax policy support to make it survive.

3. Wood Pellet Mill Machine Profit

Wood Pellet Mill Machine – How is the profit of processing biofuel pellets from waste tree branches and wood?

As a manufacturer of biological home wood pellet mills, many customers with investment intentions and new users who have just purchased will inquire some questions, that is, what is the best way to process biomass fuel pellets?

1. As a substitute for traditional mineral fuels, biomass fuel pellets are a new type of environmentally friendly biomass fuel. As an environmentally friendly fuel, the selection of raw materials is generally straw, peanut straw, wheat straw, rice husk, Rice bran, wheat bran, sawdust, sawdust, branches, bark, leaves and other solid wastes.

2. Since it is an environmentally friendly fuel, it cannot produce gases that are harmful to the environment after combustion, and no chemical raw materials such as adhesives should be added during the home wood pellet mill processing.

3. The particle density of the finished product is high, the calorific value is high, and the calorific value is large, generally about 3900 to 4800 kcal, and the calorific value after carbonization is as high as 7000 to 8000 kcal.

4. The production of biomass pellet fuel is clean and hygienic, which reduces the difficulty of feeding the staff, brings convenience to users, and saves costs at the same time.

The home wood pellet mill solves the problem of environmental pollution caused by the traditional incineration of agricultural and forestry waste, realizes the recycling of waste, and greatly helps to improve the environment. Since the establishment of the factory, developed machinery has been engaged in the research and development and production of environmental protection equipment, and its users are all over the world.

All domestic cities have been well received by the majority of users. All employees of the company will continue to work hard to provide users with more suitable high-quality and low-cost equipment as always.

poultry feed processing machine

Why should poultry feed processing machine lubricated?

Poultry feed processing machine manufacturers all know that during the operation of the feed machinery, there will be corresponding friction between the parts in contact with each other, from damage to the parts to affecting the production of mechanical equipment, thus causing the mechanical equipment to fail and causing huge economic losses to the enterprise.

Therefore, regular lubrication is usually required to ensure the normal operation of the poultry feed pellet making machine.

When lubricating feed machinery, poultry feed processing machine manufacturers usually include several different lubrication states, which can be divided into boundary friction, dry friction and liquid friction.

Generally speaking, lubricating the friction parts of equipment can effectively reduce friction, greatly reduce equipment wear and performance consumption, improve equipment operating efficiency, and prolong equipment life. As one of the main means to improve equipment performance, lubrication technology has become a common concern in related fields.

Poultry feed processing machine manufacturers need to pay attention that in the process of lubrication, they should not be blindly carried out, but should formulate a lubrication management plan in line with the development of the enterprise according to the actual production situation of the poultry feed machinery itself, so as to make greater efforts for the normal operation of the enterprise equipment. contribution.Why should the poultry feed pellet making machine be kept lubricated?

In general, the importance of lubricating care has been emphasized again and again, mainly because proper lubricating care can significantly reduce the wear level of feed pellet mills and ensure smooth production work. As we all know, any poultry feed processing machine will inevitably have problems such as decreased flexibility, decreased operating efficiency and damage after long-term use.

At this time, the maintenance of equipment obviously wastes labor and material resource costs, and causes enterprises to suffer greater economic losses.

Poultry feed processing machines are no exception. In the long-term use process, if there is a lack of corresponding lubrication, the friction strength between the contact parts will inevitably increase, resulting in damage to the parts and affecting the normal use of the entire poultry feed processing machine.

Therefore, having a good lubrication program in place before a problem occurs in the equipment will be a preventive measure to prolong the life of the equipment.

The Followings Are More Frequently Asked Questions about Poultry Feed Pellet Machines:

With the opening of 2022, the sales of Richi Machinery’s poultry feed processing machines have been rising steadily. However, for the small problems caused by the wrong operation of customers, a brief summary is as follows:

poultry feed processing machine

1.What should I do if the poultry feed processing machine cannot be pressed?

Encountering this problem, many friends will definitely think that this situation will also occur when their feed pellet machines are producing feed pellets. This is really a headache, not only wasting raw materials, but also greatly increasing the difficulty of screening feed pellets. Today, a technologist will discuss the reasons for this phenomenon with you.

Recently, many customers reported that the poultry pellet machine produced a lot of powder, and the pellets were not tight enough, the feed pellets were always soft, so what happened? (Hot product: cat litter making machine)

In general, is this considered a feed ingredient or formula? Relatively slow production changes, or changes to recipes, can quickly achieve the desired results. Excluding feed ingredients and formulations, we will analyze the machine setup for internal problems.

(1) The mold wear is too large, the sieve holes are flattened, and the expansion is serious, resulting in a decrease in pellet pressure, affecting the pellet forming rate, and causing too much powder.

(2) The moisture content of the raw material is too low or too high. If the water content is too high, the powder will not be too much, but the pellet hardness is lower, and the pellets of the poultry feed pelleting mechanism are easy to loosen. The raw material has a low water content and is difficult to extrude, resulting in too much powder.

(3) The poultry feed pellet machine is aging, the power is insufficient, the motor cannot provide enough speed, and the corresponding pressure is generated to press into pellets.

(4) The quality of the ring die is not good, or the compression is not too high.

(5) Consider using grease.

(6) The feeding scraper is not installed correctly, and the feeding cannot enter the pressing chamber.

(7) The position of the cutter is wrong, and the discharge material is squeezed into powder (but if the hole is often blocked, it is unlikely).

(8) Moisture control refers to the comprehensive control of various factors according to different situations in the whole production process, so that the final water content of the product can reach the expected target of the producer.

The main factors affecting the final water content of feed products are: water content of feed ingredients, water changes in the crushing stage, liquid addition in the mixing stage, steam water content, conditioning level, die hole size and thickness, cooler air volume and air-drying time, packaging. (Hot product: cat litter production line)

The influence of quality management and different climatic and environmental factors (generally, the moisture content of pellet feed after processing shall not exceed 12.5; but in the north, pellet feed shall not exceed 13.5. If processing in summer, due to the high ambient temperature, the optimum moisture content of finished pellets shall not exceed 13.5. 12.5, otherwise it is easy to mold and deteriorate)

Feed pellets are welcomed by more and more farmers and herdsmen with their unique advantages. It is easy to store and transport, and it is also good for animal digestion. Compared with ordinary feed, it is rich in nutrients and has a good market prospect.

In fact, the production process of feed pellets is a process of distribution ratio, as long as you master the ratio. Of course, when the pellets start, of course unskilled, but do it twice. The general poultry feed processing machine manufacturer’s manual will explain the distribution ratio of feed pellets, which can be referred to.

2.No pellets


The new poultry feed processing machine was not run-in with lubricating oil or was not run-in enough;

The moisture content of feed raw materials is too high;


Remove the raw materials in the current poultry feed processing machine, and add oil to the raw materials to run in the new machine, and the ratio of each time is: 1:3

Add some dry ingredients to adjust the moisture.

3.The motor stops suddenly


The voltage is too low.

The pressure between the pressing roller and the die plate is too high.


Use 4mm wire to avoid tripping during use.

Loosen some screws.